When trying to access a GlobalCapture module after an upgrade, you get an "License Expired" message. This message is normal, but should not persist past the standard timeout for the license. This will often happen after an upgrade.
There are several potential causes for this, but typically it has to do with the upgrade creating a local SSAdmin and SSAdministrator, which can break authentication.
If this is not the case, it can also be an issue related to registration issue with the engine and server.
If you're using Domain Authentication and you've recently upgraded, it's plausible that the upgrader has installed a local SSAdmin and/or SSAdministrator. This can cause conflicts when the authentication process is invoked by using the local SSAdministrator/SSAdmin in place of the domain SSAdministrator/SSAdmin.
To remedy this run compmgmt.msc
Find "Users and Groups" under system tools
If SSAdministrator exists under "Users" remove it
If SSAdmin exists under "Groups" remove it
Attempt to access the GlobalCapture Module again
If Solution 1 is not applicable, it may be necessary to re-register the application. Re-registering will wipe out any issues with a bad registration. This will also require a Square 9 Tech to fully resolve, so filling out a support ticket in advance is advisable.
Navigate to your inetpub/wwwroot/square9captureapi/bin directory
Set the directory view permissions to "Show Hidden Files"
Locate "ssgs.ini" and move it out of that folder (to the desktop or another holding location)
From here, the GlobalCapture application will be running as unregistered. You should now have access to the application, which will be running in Demo Mode.
Attempt to log in and navigate to the Management module, and hit "Registration" on the left hand column
Both your Capture Engine and Capture Server should be running as "Unregistered"
At this point, you will need to contact Square 9 Support and request a registration reset request. Once the request has been fulfilled, you'll have to re-enter your GlobalCapture Server and Engine registration. Please note, it is advised to always register the Server before the engine.